Remove sump cover

TM 9-2520-249-34& P

84 Position the bevel gear housing so that it rests on its

86 Remove brake coolant pump assembly (1).

back, blocking it so that the top side is level. Using

a 9/16-inch wrench, remove 16 bolts (1),

87 Bevel drive gear (4), bearing (3) and shims (2) will

come out with pump assembly (1). Do not remove

bearing (3) from gear (4) unless necessary. Tie

85 Remove sump cover (4) and gasket (5). Remove

shims (2) together and identify them as to location,

magnetic drain plug (3) and its gasket from cover

to prevent loss or confusion with other shims.

(4). Using a 9/16-inch socket wrench, remove two

Record the thickness of the shim pack.

long self-locking bolts (6) and four short self-locking

bolts (1) and plain washers. Use three of these

bolts, if necessary, to loosen oil pump assembly (2)

for removal.

6-24