Remove high-range clutch package

TM 9-2520-249-34& P

34. Position the torque converter housing on its front

face as shown. Remove snapring (1) and bronze

thrust washer (2). Remove low intermediate sun

gear (3).

36. Using two 3/ 8-16 bolts, attach two legs of sling (1)

to clutch spacer assembly (2) and carefully remove

it. Remove the sling. Remove three dowel pins (3),

which will be free ,when spacer (2) is removed.

Remove three steel clutch disks (4) and two bronze-

faced disks (5). Remove intermediate ring gear (61.

Remove another steel clutch disk (4) and another

bronze-faced disk (5).

35. Using two 3/ 8-16 bolts, attach two legs of sling (3)

to intermediate-range planetary carrier (2). Remove

planetary carrier (2) and low-range ring gear (1) as

an assembly, Remove the sling.

37. Remove high-range clutch package (1) and turbine

output shaft (2) as a unit. The pitot tube may or

may not remain in pitot collector (3) or could be any

place in the housing. Remove pitot tube (4).

6-11