Apply pressure to stator assembly

TM 9-2520-249-34& P

27. Apply pressure to stator assembly

(1) in a

counterclockwise direction to lock the stator to the

freewheel roller race. Remove the stator assembly

carefully and lay it, front downward, on a table to

prevent the race, rollers and springs from falling

29. Attach lifting

sling (1) to converter pump (2) and

out.

remove the

converter pump and gasket (3).

Remove the

sling from the pump.

Remove

snapring (41

and splined spacer (5) from ground

sleeve (6).

30. Remove large snapring (2) that retains diaphragm

28. Flatten the corners of four lock strips 131 which

(3) in the housing.

retain converter pump bolts (21. Remove eight

self-locking bolts and four lock strips. Remove two

bearing retainers (1).

6-9