Remove input oil pump assembly

TM 9-2520-249-34& P

23. Position torque converter housing assembly (3) on

wood blocks (4 and 6), on the rear mounting face.

22. Remove input oil pump assembly (5) and gasket

Support the turbine shaft on wood block (5) so that

(6). Using a 9/16-inch wrench, remove two self-

the turbine shaft is prevented from moving axially

locking bolts (1) and plain washers that retain screen

(rearward) in the housing. (Refer to step 22,

assembly (2). Remove screen assembly (2) and

turbine shaft (4), above).

gasket (3).

6-7