Figure 3-18. Removal of Clutch Bell Housing.

TM 9-2520-246-34

Figure 3-19. Removal of Shifter Shaft Cover.

Figure 3-18. Removal of Clutch Bell Housing.

NOTE

c. Companion Flange. Slide the gears on the

mainshaft to lock the transmission. Remove the cotter

When assembling the companion flange,

pin from the mainshaft and nut. Remove the retaining

coat the companion flange seal bearing

nut securing the companion flange to the mainshaft.

surface with a light coating of grease,

(See fig. 3-20.) Using the universal puller (item 4, table

artillery and automotive (GAA). MIL-G-

2-1) remove the companion flange. (See fig. 3-21.)

10924. Use care not to damage the bearing

surface of the seal. Tighten the companion

flange retainer nut to 120-150 lb-ft torque.

Figure 3-20. Transmission Shifter Forks. Gears. and Synchronizers

in Veurral Position.

3-12