Secure disk assembly

TM 9-2520-238-34

REPAIR TRANSFER GEARCASE F -- Continued

0019 00

17. Secure disk assembly (3) to output gear with gearcase washer assembly (6), new key washer (7), and cap screw (8).

Tighten screw to 30-35 lb-ft (41-46 N.m) torque. Use torque wrench (WP 0033 00, Item 44). Bend tabs on key washer.

18. Insert engine disconnect actuator (9) through hole in top of housing (10). Secure housing bracket with washer (11) and

new cotter pin (12).

19. Insert ball bearing (13) into shift collar (14). Secure with new retaining ring (15).

20. Install shift collar (14) on input shouldered shaft (16). Secure with new retaining ring (17).

21. Align splines of input shaft (16) with input gear. Install input shaft with shift collar (14) aligned with actuator (9).

0019 00-16