Table 7-11. Soldering of Components

TM 750-245-4

Table 7-10. Solder Coverage - Bifurcated Terminals - Continued

Inspection criteria

Illustration

Maximum solder

REJECT

Insufficient solder

Excess solder

Table 7-11. Soldering of Components

Inspection criteria

Illustration

ACCEPTABLE

Component lead is clean and well tinned

Solder is neat and bright and completely covers

the wire

Component centered between terminals and

seated flush on boards

Leads are not under tension - note offset from

terminal centerline (1/16 inch)

Lead bend has been made at least 1/8 inch from

component body to protect component and lead

weld

7-20