|
|
TM 746-10
5-146. Printed Circuits, Circuit Card Assemblies,
tape. Wrap each unit with neutral wrapping paper and
and Extender Cards
secure with tape. Unit pack submethod IC-1.
c. Pack items weighing 10 pounds or less
Package per paragraphs 5-168 to 5-170, inclusive.
individually in a fiberboard box and immobilize with
cellulosic cushioning. Close box with tape (see figure 5-
5-147.
Recoil Adapters, Crossover Assemblies,
1).
Feeders, and Drive Units
d. Pack items weighing more than 10 pounds
individually in a fiberboard box and immobilize contents
a. Preserve with P-9 or wrap each unit in VCI
with bound fiber. Close box with tape (see figure 5-1).
material and wrap with greaseproof barrier material.
b. Cushion item within a fiberboard box with
noncritical items (no optical surfaces).
Pack as
cellulosic cushioning or bound fiber. Close box with
referenced above, except delete the lens paper.
tape (fig 5-1).
5-144. Light Instruments, Blackout Lamps, Tail and
5-148. Recoil Mechanisms
Stop Lights, and Related Equipment
a. Clean highly finished surfaces by process C-5.
Preserve all unpainted metal surfaces with P-11. Wrap
b. Pack instruments with cases in their respective
preserved surfaces with greaseproof barrier material
compartments and close with provided fasteners.
and secure in place to adjacent painted surfaces with
c. Wrap each instrument without a case in single-
tape.
face paperboard and secure with tape. Pack a quantity
b. Pack one 105 mm recoil mechanism in wood or
of instruments in a singleor doublewall fiberboard box
plywood box. Block and brace item with securely nailed
and close with tape (fig 5-1). Mark per paragraph 3-5.
wood blocking to immobilize the item (fig 5-7).
c. Pack one 155 mm recoil mechanism in an open
5-145. Pistons, Buffer Pistons, Recoil Rods, Valve
crate. Block and brace item with securely nailed wood
Assemblies, Glands, and Similar Equipment
blocking to immobilize the item. Shroud mechanism
with waterproof barrier material and secure in place with
a. Clean by process C-8. Be sure that all highly
tape.
polished surfaces are thoroughly cleaned.
b. Preserve unpainted surfaces of items weighing
5-149.
Saddles, Saddle Assemblies,
Clamp
up to 20 pounds with P-9 or wrap the entire item in VCI.
Assemblies, and Related Items
Overwrap with greaseproof wrapping paper and unit
pack submethod IC-1. Pack one or more items in a
a. Preserve unpainted surfaces with P-1.
fiberboard box. Separate heavier items with bound fiber
b. Pack one or more units, dependent upon size
or fiberboard sheets. Close box with tape (fig 5-1).
and weight, into a fiberboard or wood box. Cushion
c. Preserve unpainted surfaces of items weighing
within the fiberboard box with bound fiber and block and
20 pounds or more with P-11. Wrap preserved surfaces
brace within the wood box with securely nailed wood
with greaseproof barrier material and secure with tape.
blocking and close with tape (fig 5-1). Mark per
Pack items weighing less than 60 pounds in a double-
wall fiberboard box. Pack items weighing more than 60
pounds in a wood or plywood box. Block and brace with
5-150.
Sights, Reflex, and Similar Sights and
either fiberboard sheet stock or bound fiber within the
Sighting Stations
doublewall box or nailed wood blocking within the wood
boxes Close double-wall box with tape (fig 5-1) and
reinforce with filament-reinforced tape.
Mark per
c. Pack in reusable metal or plastic containers
when available in lieu of the fiberboard box and
cushioning prescribed in paragraph 5-151 for training
aids.
5-151. Training Aids
5-24
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |