Refill Kit, Analyzing Components, CBR Agent Sampling and Analyzing Kit, M33

TM 746-10

1 ea. M43 detector

bound fiber cushioning material. Close the box with

1 ea. M229 refill kit

tape (see fig 4-3).

1 ea. M182 mounting kit

(a) Components comprising the M8 through M18

1 ea. installation kit for M113 personnel

alarm, chemical agent, automatic and portable are as

carrier

follows:

(g) M15 alarm (less batteries). Pack same as

M42 alarm unit,

M14 except installation kit for M14 command post

M43 detector unit,

vehicles.

M74 test set,

M168 cable assembly, power, electric,

(h) M16 alarm (less batteries).

M228 mounting kit,

1 ea. M42 alarm

M182 mounting kit,

1 ea. M43 detector

M10 power supply,

1 ea. M229 refill kit

M229 refill kit.

1 ea. M10 power supply

(b) Vehicular adaptation kits include BB 501/U

1 ea. M228 mounting kit

rechargeable battery; installation kits for 1/4-ton, 3/4-

1 ea. installation kit for 1/4-ton vehicle

ton, 2 1/2-ton vehicles; and M113 personnel carrier and

(i) M17 alarm (less batteries). Pack same as

M114 command post vehicle.

M16 except installation kit for 3/4-ton vehicle.

Note

(j) M18 alarm (less batteries). Pack same as

These items, although components

M16 except installation kit for 2 -ton vehicle.

of the alarm system, are not included

c. Unserviceable,

economically

reparable

within any of the systems and will be

retrograde materiel. Clean, dry, preserve, pack, and

packed separately. These items are

mark the same as for serviceable retrograde materiel,

components of the winterization kit

as specified in b above, except include condition code

M253.

"F" in the marking.

(4) Packing. Each alarm system (M8 through M18)

d. Serviceable materiel to be recycled. Clean, dry,

consists of a combination of components listed in

preserve and pack per b above. Mark per paragraph 3-

paragraph 4-140b(3Xa). Pack each system in wood

boxes in the combinations outlined in (a) through (j)

Note

below. Use boxes of minimum cube. Fill all voids

The above items do not require

within each box using cellulosic cushioning material.

consideration in meeting special

Close boxes and apply galvanized steel strapping. The

Department of Transportation hazard

combinations to be packed are as follows:

classification requirements.

(a) M8 alarm (less batteries).

1 ea. M42 alarm

4-141. Refill Kit, Analyzing Components, CBR Agent

1 ea. M43 detector

Sampling and Analyzing Kit, M33

1 ea. M229 refill kit

a. Serviceable retrograde materiel.

(b) M10 alarm (less batteries).

(1) Cleaning and drying. Clean and dry all items by

a ea. M42 alarm

process C-1 and procedure D-4, respectively.

1 ea. M43 detector

(2) Preservative application. Apply P-9 to the bare

1 ea. M229 refill

metal surfaces of the item.

1 ea. M10 power supply

(3) Unit pack. Wrap preserved items in

1 ea. M42 alarm

greaseproof, waterproof barrier material and secure with

1 ea. M43 detector

tape. Individually package the kit items in a heat-

1 ea. M229 refill kit

sealable, watervaporproof bag. Place all of the kit items

1 ea. M228 mounting kit

into a weather-resistant fiberboard box and secure with

1 ea. installation kit for 1/4-ton vehicle

tape (fig 4-3).

(d) M12 alarm (less batteries). Pack same as

(4) Packing. Pack four unit-packed kits within a

M11 except installation kit for 3/4-ton vehicle.

cleated-plywood shipping container. Place fiber-board

(e) M13 alarm (less batteries). Pack same as

pads between the contents and inside surfaces of the

M11 except installation kit for 2 1/2-ton vehicle.

wood box to fill any voids and ensure a tight pack.

(f)

M14 alarm (less batteries).

Close the box and apply galvanized steel strapping.

1 ea. M42 alarm

4-76