|
|
TM 746-10
material.
Pad sharp edges and projections with
(1) Apply P-2 to all bare, exposed, and
cellulosic cushioning material
uncoated metal surfaces, wrap with greaseproof barrier
material, and seal with tape.
(2) If rigid metal container is available, unit
pack submethod IA-5. If rigid metal container is not
(2) Unit pack method I. Place wrapped item
available, unit pack submethod IC-1. Place wrapped
in a fiberboard box. Cushion top, bottom, and sides with
and cushioned item inside of greaseproof, barrier-
sufficient bound fiber material to prevent damage from
material bag and heat seal. Place heat sealed bag in
movement or shock.
fiberboard box. Cushion top, bottom, and sides with
(3) Place a number of fiberboard boxes in an
sufficient bound fiber material to prevent damage from
overseas-type plywood box.
shock or movement.
aj. Flight controls.
(3) Place a number of unit packed items in an
(1) Apply P-2 to bare, exposed, and uncoated
overseas-type plywood box.
metal surfaces, wrap with greaseproof barrier material,
ao. Gear boxes.
and secure with tape.
(1) Drain lubricant from transmission. Flush with
(2) Unit pack method I.
Place item in
clean operating fluid. Cap or plug all openings.
fiberboard box and cushion with cellulosic cushioning
(2) Unit pack submethod IId.
Secure item in
material.
reusable metal container with container-mounted
(3) Place a number of unit packed items in an
holding devices or firmly cushion top and bottom with
overseas-type plywood box.
molded fiber material to prevent damage from shock or
ak. Fuel controls and governors, turbine engines.
movement. Distribute and secure correct amount of
(1) Flush internally with MIL-L-6081, grade
desiccant. If metal container is not available, unit pack
1010. Apply P-2 to all bare, exposed, and uncoated
submethod IIb. The outer container may be a fiberboard
metal surfaces, wrap with greaseproof barrier material,
or plywood box.
and secure with tape. Cap, plug, or seal all openings.
ap. Generators.
Pack item in reusable metal
(2) Unit pack submethod IId. Place item in
container. Cushion top, bottom, and sides with sufficient
applicable reusable metal container.
Cushion top,
bound fiber material to prevent damage from movement
bottom, and sides with sufficient bound fiber material to
or shock. Distribute and secure correct amount of
prevent damage from shock or movement. Distribute
desiccant. If metal container is not available, unit pack
and secure correct amount of desiccant within the
submethod IIc. Cushion item with cellulosic material
container.
and place in heat sealed bag. Properly position correct
al. Fuel pumps and lube pumps.
amount of desiccant. Place desiccated, sealed bag in a
(1) Flush internally with MIL-L-6081, grade
plywood box.
1010. Apply P-2 to all bare, exposed, and uncoated
aq. Heaters. Unit pack submethod IA-14. Place
metal surfaces, wrap with greaseproof barrier material,
item in a fiberboard box. Cushion top, bottom, and
and secure with tape. Cap or plug all openings.
sides with sufficient bound fiber material to prevent
(2) Unit pack submethod IId. Place item in
damage from shock or movement. Place box in a heat-
applicable reusable metal container.
Cushion top,
sealed bag of watervaporproof barrier material. Place
bottom, and sides with sufficient bound fiber material to
box in an overseas-type plywood box.
prevent damage from shock or movement. Distribute
ar. Hoists and winches.
and secure correct amount of desiccant within the
(1) Apply P-2 to all bare, exposed, and
container.
uncoated metal surfaces, wrap with greaseproof barrier
am. Fuselage panels, cargo ramps, floors, and
material, and secure with tape.
miscellaneous fuselage parts.
(2) Pack items weighing 25 pounds or less
(1) Apply P-2 to all bare, exposed, and
having no dimension greater than 16 inches and cube
uncoated metal surfaces, wrap or cover preserved areas
not exceeding 1 cubic foot submethod IIb. Cushion top,
with greaseproof barrier material, and secure with tape.
bottom, and sides with sufficient bound fiber material to
(2) Unit pack method I. Place item in a
prevent damage from shock or movement. Distribute
plywood or wood box. Block and brace with wood.
and secure correct amount of desiccant. Seal inner
Cushion contact points with bound fiber material. Make
container in a watervaporproof bag and place in a
sure item is properly secured to prevent damage from
fiberboard box. Pack items that exceed either the
shock or movement.
weight or dimension requirements submethod IIa. Cap
or plug all openings. Place in an overseas-type
an. Gauges and indicators.
(1) Wrap item with greaseproof barrier
4-66
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |