|
|
TM 746-10
markings but keep the nomenclature and stock number
to identify the item for which the box applies.
Place strapping conforming to either ASTM D3950 or
ASTM D3953 around the sides, top, and bottom of the
box.
(d) Store the pack in a clean, moisture-free
area with the identifying markings facing outward.
(g) Cover obsolete markings with obliterating
(e) To reuse the pack, place the preserved item
lusterless enamel conforming to TT-E-515 (8010-00-
in the preformed foam and close the top flaps of the
291-0889) and sand color 30277 of FED-STD-595 or its
container. Seal all openings with tape (fig 3-27).
equal. Mark for shipment as specified in paragraph 3-5.
(f) To reclose an encapsulated pack, place the
item in the preformed foam, place the top half of the
pack onto the lower half, and seal the box opening (cut
area) with tape.
3-39
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |