Figure 3-21. FIP Split Pak, Alternate Technique.

TM 746-10

Figure 3-21. FIP Split Pak, Alternate Technique.

Instructions contained herein are for these four

Personnel engaged in box fabrication shall wear safety

techniques. Field packaging facilities may use, but are

glasses, safety shoes, and gloves.

not limited to, these four techniques. If other techniques

are to be used, refer to MIL-STD-1191.

CAUTION

Do not wear gloves while operating power

tools such as power saws and drills.

i. Safety.

As required, the following safety

procedures shall be followed by all personnel during the

dispensing of foam and the fabrication of containers:

(2) If chemical component A or B is splashed

onto the skin, wipe the chemical off with a clean cloth

and immediately apply tincture of green soap or rubbing

(1) When preparing or dispensing foam, all

alcohol to the splashed areas. Wait 5 minutes and wash

personnel involved in the operation shall wear protective

or shower with clean water.

equipment and clothing including goggles or face shield,

rubberized gloves, and a protective apron or coveralls.

3-29