DD Form 1750.

TM 746-10

CAUTION

(2) Application of packing lists. Two copies

Do not cover other markings with the

shall be prepared for each multipack container. One

project code label.

copy is placed in a bag and placed inside the container.

The other shall be sealed with tape or put in a water-

resistant envelope (PPP-E-540, class 4) that shall be

3 Cylindrical containers.

Two

firmly sealed to the exterior of the container.

discs equally spaced and on opposite surfaces of the

circumference.

(a) The water-resistant envelope shall

be secured to the exterior of the palletized load or

4 -Irregular-shaped

containers

container in the most protected location with pressure-

and loose or unpacked items. Stenciled or printed on

sensitive tape, tacks, or staples, or it can be secured in

the identification marked side of a tag.

a pressure-sensitive envelope.

5 Vehicles

other

major,

(b) For overseas shipments, except

unpacked items. One disc on each marking board. As

parcel post, the waterproof envelope shall be further

an alternate method, discs may be applied directly on

protected with a packing list protector securely attached

the vehicle or equipment, secured with PPP-T-60, type

to the palletized-unitized load or container.

III, class 2, or PPP-T-70, pressure-sensitive tape. The

tape shall be placed on all four edges of the label and

shall extend a minimum of one-half inch from the edges.

they shall not be driven into the envelope in such a

manner as to fasten or bind the packing list, nor shall

6. Parcel post. One disc adjacent

they be of such length to penetrate the container.

to the address marking.

(3) Alternate application of packing lists. An

7. MILVANs/SEAVANs. No label

alternate method of applying a packing list to fiberboard,

required. However, the containers or items comprising

metal, or plastic containers is the placing of a glassine

the van load shall be labeled as specified herein.

sheet of paper over the folded packing list, then

(b) Label adhesive MMM-A-179 shall

applying transparent tape over the glassine sheet.

be used on all wooden boxes, crates, fiberboard boxes,

(a) The tape should extend half an inch

plastic or fiberglass containers, and marking boards.

from all edges of the packing list.

For vehicles or equipment with painted surfaces, use the

label adhesive listed in the applicable paragraph herein

(b) The glassine paper shall have the

for the coating of address labels.

words "PACKING LIST ENCLOSED" printed on the

face.

m. DD Form 1750.

n. DOD Form 1348-1.

(1) DD Form 1750 defined. A DD Form 1750

(Packing List) provides a description of the contents of a

(1) Shipment units of single line items. One

multipack container or unitized load and shall be used

copy of DD Form 1348-1 (DOD Single Line Item

for shipments generated by DOD activities.

Release/Receipt Document) must be attached to the

materiel in shipping container No. 1. In addition, at

(a) Each set, kit, or assembly having

least one copy will be enclosed in a water-resistant

unlike stock-numbered items but identified by a single

envelope and attached to the outside of the number 1

stock number shall have a packing list attached to the

shipping container.

end or side of the container.

(a) When the storage container is used

(b) Each set, kit, or assembly

as the shipping container, the copy normally placed on

comprising a palletized-unitized load or consolidation

the inside of the container shall be enclosed with the

container shall also have a packing list attached to the

copy attached to container No. 1. For overseas

exterior surface of each container.

shipments, the water-resistant envelope shall be further

protected with an envelope protector with the words

numbered items that are contained in two or more

"Materiel Release/Receipt Documents" marked on the

exterior shipping containers (single stock-numbered

outside of the protector.

assembled sets) require a packing list for each

(b) If containerization of the shipment

container.

unit is accomplished by the shipper, an additional copy

1. The packing list shall be

must be securely fastened to the inside door or access

attached to the exterior of each container.

wall of the container.

2. A master packing list shall be

prepared for the set and a copy attached to the number

during the movement process (e.g., transshipment

one container.

points), a copy of DD Form 1348-1 will be removed from

the

water-resistant

envelope

and

will

3-26