|
|
TM 746-10
ultimate consignee do not require address markings.
(e) If the item has no serial number, a
Consolidation activities receiving shipments for
date (month, day, year) followed by a capital letter to
consolidation into SEAVAN/MILVAN are not required to
identify a set or assembly shall be shown on the
obliterate address labels applied by the original shipper.
shipping container instead of the serial number. Each
l. Special markings (figs 3-19 and 3-20). Some
set shall bear a different letter. Examples are-
shipments of retrograde/recyclable materiel require
special markings. Some of these markings are-
SET 1
SET 2
SET 3
PK 1 of 3
PK 1 of 3
PK 1 of 3
(1) Classified shipment markings.
4-1-76A
4-1-76B
4-1-76C
(a) Shipments of classified material
shall not have packing lists attached to the outside of
(f) Set or assembly markings will be
the container.
placed on the surface containing the identification
(b) Markings indicating the classified
markings and shall be located in the lower right-hand
nature of the material, its manufacture, and its security
corner.
classification shall not appear on the exterior of the
container.
(4) Single stock-numbered sets.
(c) Appropriate instructions shall be
issued by the cognizant activity concerned or by
(a) This marking is used when the
departmental regulations.
components of a single stock-numbered item are
packed in two or more shipping containers or stored
together as a set.
(2) Transportation
protective
service
(b) The stock number shown on each
markings.
shipping container will be that of the complete set and
(a) Shipments identified as classified or
will be prefixed with "P/O" (part of).
sensitive cargo or items requiring special handling
during transit shall be provided "Signature Security
Service,
Protective
Security
Service,
Armed
(5) Method II marking. Method II packs which
Surveillance, or Armed Guard Service."
serve as shipping containers must bear a Method II
precautionary label, OF 73 (7540-00-139-4738) or OF
(b) When required by the applicable
74 (7540-00-139-4752), on the identification marked
carriers tariff, each exterior container shall be labeled or
side.
tagged to indicate the service requested in the lower
right hand corner of the identification marked side.
(a) Method II markings may be applied
by using this label or by printing or stenciling a copy of
(c) When shipments are sent by
the label on the container using waterproof red ink.
military aircraft, the shipper shall prepare a DD Form
1387-2 (Special Handling Data/Certification) per the
(b) When there is insufficient space for
requirements of TM 38-250 and DOD 4500.32-R.
applying the label, the words "METHOD II PACKAGE-
DO NOT OPEN UNTIL READY FOR USE" in letters as
large as space permits must be printed or stenciled on
(3) Set or assembly markings.
the container adjacent to the identification markings.
(a) When a set or assembly is placed in
two or more containers, all containers with component
(6) Serial number markings.
An item
parts are shipped together.
assigned a serial number shall have the number applied
(b) Each container will have its own
to the unit pack and the intermediate and exterior
number within the set, the total number of containers
containers preceded by the abbreviation "SER NO." The
making up the set, and the number of the set within
serial number shall be located directly below the
each shipment.
identification markings. (Example: SER NO. 26481.)
(c) A 2-inch, black disc will be placed
(7) ARI markings.
In addition to the
above these numbers on each container. For surfaces
requirements given in paragraph 1-12, project code disc
on which black is not legible, a yellow or white disc must
labels for ARI markings shall be used. Lettering shall be
be applied.
black on a white background. Labels shall be stenciled
(d) All
component
parts
of
or printed in the center of the disc (or circle) with the
disassembled items will have the serial number of the
code letters "ARI" proportionate to the size of the circle.
item on each shipping container of the set. An example
Two sizes of labels are available for use. DA Label 143
is-
(Project Code DISC) (3X3) has a 2-inch diameter disc in
its center, while DA Label 143-2 (Project Code DISC)
SET 1
(9X9) has a 6-inch diameter disc in its center. In
PK 1 OF 5
general, containers with sides 24 inches or more in
SER NO. 18063
length
or
tubular-shaped
containers
with
a
circumference
3-23
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |