Installation - TM-55-8145-203-13-P0042

TM 55-8145-203-13&P

b. Installation

NOTE

Perform Steps 1 through 4 for Model ESETC-01.

This procedure applies to either right-hand or left-

hand shelf support beams.

Perform Steps 5 and 6 for Model 101.

(1) Slide new support beam on mating right- or left-

hand support beam.

(2) Position the beam at the same height as the other

beams that support the same shelves.

(3) Slide ends outward until the rivets (1) on the ends

align with the tear-drop cutouts in the vertical shelf

support (2).

(4) Pull out spring clips (3) and insert rivets (1) into the

tear-drop cutouts. Slide both ends down to engage

rivets (1) with the vertical shelf support (2). Release

spring clips (3) to lock the beam supports in place.

VIEW FROM

REAR

(5) Insert end of shelf support beam (1) into vertical

shelf support "E-track" (2) and lower until lever (3)

is completely engaged.

(6) Repeat the above step on other side of support

beam (1).

3-8

Change 1