LOADING THE CONTAINER.

TM 55-8145-203-13&P

p. Secure the left-hand side of shelf support beam (1)

by sliding out end and inserting into vertical shelf

support "E-track" (2). Lower end of support beam

until lever (3) is completely engaged.

q. Repeat Step m on the right-hand side of shelf

support beam (1).

r. Repeat Steps i through n until all four shelf

support beams (1) have been adjusted to the same

height.

s. Install shelves (1) on top of support beams (2).

2.9 LOADING THE CONTAINER.

After the shelf support beams have been adjusted to

desired positions (refer to Paragraph 2.8) the container

may be loaded.

a. For easier loading, it is usually desirable to place

heavier items on the floor or lower shelves.

Distribute the load as evenly as possible.

b. To prevent excessive movement, fill each shelf as

much as possible.

c. Tie-downs are provided in all corners and along the

tops and bottoms of the side and front walls. Cargo

may be secured to these tie-downs using rope or

webbing.

2-6.2 Change e 1

Chang 1