SECTION I. DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND INDICATORS

TM 55-8145-203-13&P

SECTION I. DESCRIPTION AND USE OF OPERATOR'S

CONTROLS AND INDICATORS

2.1 OVERVIEW.

1. Securing Latch. Keeps the handles in the closed position.

2. Handles. When securing latch is released, the handles can be pivoted up then out. When both handles on both doors are

pivoted out, the doors can be opened.

3. Door Chains (Model ESETC-01) or Door Tie (Model 101). Used to keep the open door from swinging closed. When door

is open, secure the free end of the door chain or door tie to the tie-back hook on the side of the container.

4. Ventilator (Model ESETC-01). Slide open to allow ventilation. Slide closed to stop ventilation. This applies only to containers

with serial numbers up to TC0100323. Containers with serial numbers TC0100324 or greater use non-closable vents.

Ventilator (Model 101). Allows for ventilation and uses non-closable vents.

5. Connecting Link Assembly. Used at the corners on each side of the container to connect two containers together.

6. Handle. Used to adjust the connector to the desired position when two containers are being connected.

HOOK

MODEL ESETC-01

HOOK

MODEL 101

2-2

Change 1