Power shutdown. - TM-55-4920-440-13-P0041

TM 55-4920-440-13&P

2-9. Power shutdown.

a. See that all electrical tools and shop equipment have

been turned OFF.

b. Circuit breaker panel. Move main circuits breaker (1) in

the circuit breaker panel (2) from ON to OFF.

c. Disconnecting ECUs.

1. Place MODE SELECTOR switch (1) of

ECU (2) in OFF position.

2. Unscrew lock ring (3) and pull connector

(4) from ECU receptacle (5). Store cable (6) IAW TM

10-5411-201-14.

3. Install can (7) on receptacle (5).

d. Disconnecting power distribution panel from

(1) Ensure all circuit breakers on the

power distribution panel are in the off position,

(2) Disconnect color coded wires on

pigtail from lugs on generator.

e. Disconnecting main power cable.

2. Install dust cap (4) on "P1" receptacle (5)

1. Unscrew lock ring (1), disconnect power

3. After

qualified

electricians

have

cable connector (2) at power entry panel (3).

disconnected male end of cable (6) from power

distribution panel (7), clean cable (8) with rag and roll:

Change 1 2-26