Striking the shelter - TM-55-4920-439-13-P0048

TM 55-4920-439-13&P

WARNING

When all equipment and materiel is stored on the stationary side of the shelter, the

limited floor space presents a safety hazard to operating personnel. This is most

critical during the raising and lowering of the roof panel. Failure to observe

supplemental instructions could result in serious injury to personnel. Personnel

inside the shelter could become trapped between the roof panel and equipment

bolted to the floor.

c. Two people inside the shelter, using the support

struts (1), will lower the roof panel (2) until two personnel

outside can reach and hold the weight of the roof.

d. Inside personnel will shorten the struts (1) and

secure to roof brackets (3). They will then move into

position to assist outside personnel.

e. After all inside personnel are clear allow the roof

panel (2) to close to the vertical position.

f. After the shelter has been folded as detailed in steps a thru e and prepared in accordance with

TM 10-5411-201-14, the Electric/Instrument Shop is ready for transport or storage.

Change 1 2-33/(2-34 blank)