Supplemental Safety Instructions - TM-55-4920-439-13-P0015

TM 55-4920-439-13&P

2. As soon as there is enough floor area (4),

the personnel inside will move to the expanded side of

the shelter raising the roof with extended support struts

(2).

3. Once the struts (2) are totally supporting the

roof panel (1), the end walls (5) are swung open.

WARNING

The fold-out floor counterbalance cables must be secured in the cable housings

prior to raising the shelter floor from its lowered position to its level position. If

the counterbalance cables are not secured, the counterbalance cables will remain

under tension. DO NOT attempt to remove cables if the counterbalance cables are

not secured. Removing cables while under tension could cause serious injury to

personnel.

4. (For shelter P/N 136-0000-101) Raise the

upper lockout plates (6) on each end wall and install

upper lockout pins (7) into the cable housings.

2-2 Change 1