Storage procedures. - TM-55-4920-437-13-P0047

TM 55-4920-437-13&P

5. Position top bar (6) and install two bolts (2)

with washers (12).

6. Close other ECU shelf and secure latches

as in step 4.

7. Insert four plugs (13) in each ECU shelf.

CAUTION

Two vises, mounted on the bin storage cabinets, must be positioned so that

handles are located toward narrow sides of cabinets. If handles are pointed in

direction of movable side of shelter, they will restrict dosing of the end wall and

could result in damage to the wall.

Storage procedures.

In the event the

2-12.

Propeller/Rotor Shop is to be placed in storage the

provisions of TM 740-90-1, TM 743-200-1 and applicable

shop equipment TM's will be followed.

2-13. Striking the shelter. Procedures for striking the

shelter are contained in TM 10-5411-201-14.

addition, the following "Supplemental Instructions" will be

observed.

a. Remove screws (1) at both corners of fold-out

floor.

Change 1 2-31