Other shop utilities. - TM-55-4920-437-13-P0034

TM 55-4920-437-13&P

2-6. Other shop utilities.

In addition to electrical power the shop is provided with connections for compressed air and water.

a. Compressed air connection.

1. Remove protective dust cap (1) from air inlet

nipple (2) at the service utility panel (3). Store in shop

storage chest.

2. From storage

chest,

remove

quick

disconnect coupling (4).

3. Install the male, quick disconnect coupling

(4) on air inlet nipple (2).

4. Tighten coupling (4) securely.

b. Water supply connection.

NOTE

When water is to be supplied to

shelter proceed as follows.

1. Remove protective dust cap (1) from each

end of water feed thru connector (2).

2. Install adapters and fittings as required.

NOTE

Reposition storage chest in mounting bracket when no longer required.

2-7. Checking shelter level . Once all equipment is in the recommended operational position, recheck leveling of

shelter. Use procedures in TM 10-5411-201-14 to verify and adjust level. Correct adjustment is essential to ensure

proper operation of machine tools, doors and access panels.

The Propeller/Rotor Shop is now operational.

2-18