Figure 3-104. Speed Reducer Low Speed and Intermediate Shafts.

TM 55-1930-208-24

(17) Remove eight bolts (52), eight lockwashers (53), cover (54), shim gasket (55), seal (56), gasket (57), and seal

(58).

(18) Refer to figure 3-104 and attach a sling to the low speed gear. Attach a lifting device capable of litfing 150 lbs

(68.10 Kg) and remove assembled low speed shaft assembly.

(19) Press bearing (1 and 2) off of shaft (8).

NOTE

To ease removal, heat may be applied to bearing cone or inner race.

(20) Press gear (4) off of shaft (8) and remove spacer (3).

(21) Remove seal ring (5) and keys (6 and 7) from shaft (8).

(22) Remove assembled intermediate shaft from housing.

(23) Press bearings (9 and 10) and bevel pinion (11) off of shaft (14).

(24) Remove spacer (12) and key (13) from shaft (14).

Figure 3-104. Speed Reducer Low Speed and Intermediate Shafts.

3-175