COVER, ROCKER ARM.

TM 55-1930-208-24

3-34. COVER, ROCKER ARM.

This task covers:

a. Removal

Cleaning

c. Inspection

d. Installation

INITIAL SETUP:

Tools Required:

Tool Kit, General Mechanic's (Item 1, Appendix B)

Wrench, Torque (Item 71, Appendix B)

Materials Required:

Brush, Medium Bristle (Item 14, Appendix C)

Cloth, Soft (Item 23, Appendix C)

Gasket P/N 5103646

Gasket P/N 5104081

Solvent, Cleaning (Item 4, Appendix C)

Equipment Conditions:

Engine shut down (paragraph 2-11, TM 55-1930-208-10).

a. Removal. (Refer to figure 3-69).

(1) Disconnect breather hose (1).

(2) Remove two bolts (2), two flat washers (3), and two isolators (4).

(3) Remove cover assembly (5) and gasket (6). Discard gasket (6).

(4) Remove screw (7), retainer (8), disk (9), retainer (10), cover (11), and seal (12) from cover (5).

3-121