MANIFOLD, EXHAUST.

TM 55-1930-208-24

3-33. MANIFOLD, EXHAUST.

This task covers:

a. Removal

Cleaning

c. Inspection

d. Installation

INITIAL SETUP:

Tools Required:

Tool Kit, General Mechanic's (Item 1, Appendix B)

Wrench, Torque (Item 71, Appendix B)

Materials Required:

Cloth, Soft (Item 23, Appendix C)

Gasket P/N 5145238

Gasket P/N 5150196

Solvent, Cleaning (Item 4, Appendix C)

Washer, Lock P/N MS35338-46

Equipment Conditions:

Engine shut down (paragraph 2-11, TM 55-1930-208-10).

Exhaust muffler removed (paragraph 3-9, TM 55-1930-208-10).

a. Removal. (Refer to figure 3-68).

(1) Remove five nuts (1), two crabs (2), three flat washers (3), manifold (4), and gasket (5). Discard gasket

(5).

(2) Remove four nuts (6), four lockwashers (7), flange (8), and gasket (9). Discard gasket (9).

(3) Remove four studs (10) and plug (11) from manifold.

Figure 3-68. Exhaust Manifold, Removal/Installation.

3-119