Figure 3-17. Governor, Removal/Installation

TM 55-1930-208-24

(4) Lift up on the sub-cap assembly until a definite snap indicates that the fuel rod and collar have been freed

from the terminal lever cross pill. Then, remove the sub-cap assembly, pulling the fuel rod out of the hole

in cylinder head and throttle control rod mounting bracket.

(5) Remove four bolts (6, figure 3-17) and four lockwashers (7) and lift the governor housing (8) away from the

drive housing. Remove governor housing gasket (9).

(6) Remove six drive housing bolts (10) and six flat washers (11) and separate the drive housing (12) from the

blower. Remove drive housing gasket (13).

Figure 3-17. Governor, Removal/Installation

Figure 3-18. Top View of Governor with Cover Removed.

3-41