Installation. - TM-55-1930-208-240023

TM 55-1930-208-24

3-6. ENGINE SHUTDOWN - Continued.

b. Repair. Repair is limited to replacing damaged parts.

c. Installation.

(1) Position control (31) on blower and secure with existing blower bolts.

(2) Install connector (30), rod (29), two lockwashers (28), and two nuts (27).

(3) Install clamp (26) and secure with screw (25), lockwasher (24), and nut (23).

(4) Install valve (23), two adapters (20), and elbow (21).

(5) Install nipple (19), elbow (18), tee (17), and three elbows (16).

(6) Install hoses (15, 14, and 13). Install clamp (12) and secure with lockwasher (11) and screw (10).

(7) Position pull assembly (9) on expansion dome and secure with five screws (8).

(8) Install cable (7) and connect to pull assembly (9) and control (31).

(9) Install coupling (6) to pulley (4) and install pipe (5).

(10) Install pulleys (4), coupling (3), and pipe (2). Connect bushing (1) to engine control.

d. Test. Refer to TM 55-1930-208-10, paragraph 3-8 and test engine shutdown.

3-6