Table 2-2. Operator/Crew Preventative Maintenance Checks and Services

TM 55-1915-200-10

EQUIPMENT NOT READY/AVAILABLE

- BEFORE D - DURING A - AFTER W - WEEKLY M - MONTHLY Q - QUARTERLY S/A SEMI ANNUALLY AN - ANNUALLY

T/A - TRIENNIALLY

ITEM

AWM

Q S/A AN T/A

ITEMS TO BE INSPECTED

CHECK FOR

ACTION

PMC

NMC

NUMBER

NOTE

If the equipment must be kept in continuous

operation, check and service only those items that

can be checked and serviced without disturbing

operation. Make the complete checks and

services when the equipment can be shutdown.

WARNING

Electrical hazards. The electrical system and

pneumatic equipment system are dangerous

when performing maintenance or inspections. Be

sure to observe all warnings to prevent injury or

possible death of personnel.

CAUTION

Equipment operation is allowable with minor

leakage (Class I or II). Consider the fluid capacity

in the item/system being checked/inspected.

When in doubt, notify the section supervisor.

When Operating with Class I or Class II leaks,

continue to check fluid levels as required in the

PMCS.

Class III leaks should be reported to your

supervisor or unit maintenance.

CAUTION

Operating the equipment contrary to published

instructions will cause damage and possible

destruction of the equipment. Always be sure the

equipment is operated properly.

Inspect for structural damage.

Repair structural damage,

Watertight integrity or

External Hull (above

refer to next level of

operational capability

waterline)

maintenance

is impaired

LSV PMCS

Change 12

2-255