ASSEMBLY - TM-55-1905-223-24-70155

TM 55-1905-223-24-7

ASSEMBLY

a. Install sleeve (8), flat washer (7), electrical coil (6), flat washer (5) and sleeve (4).

b. Install yoke (22) into housing (21).

Install valve seat (13), valve disk (17), helical compression spring (14), gasket (15), and cap (16) into valve body

(12).

d. Install helical compression spring (9) into solenoid plunger (10).

NOTE

The wide end of the helical compression spring (9) is installed in the

solenoid plunger (10) first. The closed end protrudes from the top of the

solenoid plunger (10).

e. Install solenoid plunger (10) with helical compression spring (9) and gasket(11) into sleeve nut (18).

Install sleeve nut (18), gasket (19) and bonnet (20) into valve body (12).

g. Install housing (21) on sleeve nut (18).

h. Install access cover (3) and identification plate (2) on yoke (22).

Install retaining cap (1) on sleeve nut (18).

3-12