|
|
TM 55-1905-223-24-4
g.
Install cam bushing, mark the cam bushing and block to align the oil hole. (FIGURE 4-91)
FIGURE 4-91. Cam Bushing Installation.
h.
Using a universal bushing installation tool, install the cam bushing flush with the block. (FIGURE 4-92)
FIGURE 4-92. Using Installation Tool.
CAUTION
Make sure the oil hole is aligned.
i.
A 3.2mm (0.128") diameter rod must be able to pass through the oil hole. (FIGURE 4-93)
FIGURE 4-93. Check Oil Hole Alignment.
4-64
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |