 |
|||
|
|
|||
|
Page Title:
FIGURE 4-9. Washing Cylinder Head. |
|
||
| ||||||||||
|
|
 TM 55-1905-223-24-4
c.
Wash the cylinder head in hot soapy water. Let set for 30 minutes with water temperature 190 (88 ).
F
C
See FIGURE 4-9.
FIGURE 4-9. Washing Cylinder Head.
WARNING
High pressure compressed air tanks, piping systems, and air operated
equipment has a potential for serious injury to eyes and exposed areas of
skin due to escaping air pressure.
d.
After rinsing, use compressed air to dry.
e.
Polish the gasket surfaces with 400 grit paper. Use sanding block to maintain a flat surface.
f.
Inspect the valve guides for scuffing or scoring. Measure the valve guide bore as shown in FIGURE 4-10.
Minimum (MIN) and Maximum (MAX) diameters are shown in Table 4-1.
4-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals