REPLACEMENT - TM-55-1905-223-24-40205

TM 55-1905-223-24-4

REPLACEMENT

a. Rotate the engine until the crankshaft is vertical.

FIGURE 3-83. Engine Rotation.

CAUTION

If the engine is rotated more than 90 the tappets can fall out.

b. Install the bearing sleeves (5, FIGURE 3-82) into both the rod (3) and the cap (9). Make sure the tang on the

bearing/sleeves are in the slot of the cap and rod.

Lubricate the rod bearings with a light film of Lubriplate 105.

d. Lubricate the rings and piston skirts with clean engine oil.

e. Check rings for position, FIGURE 3-84, and use a piston ring compressor to compress rings.

FIGURE 3-84. Piston Ring Position.

3-82