 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 55-1905-223-24-4
REPLACEMENT
a.
Install engine airflow baffle (1).
CAUTION
The tappet gasket has an adhesive back.
Pull off the protective cover on the gasket
to expose the adhesive surface.
If a rubber tappet cover gasket is used,
it must be installed on the cover as shown
in the illustration. (FIGURE 3-46)
FIGURE 3-46. Rubber Tappet Gasket.
b.
Apply K&W copper coat gasket sealant to the block side of thegasket.
Replace cover gasket (9).
c.
Replace the cover (8) and secure with the mounting capscrews (6) and
new packing (7). Torque 18 ft-lbs (24 N-m).
d.
Install preformed hose (3) and secure with hose clamp (2).
e.
Replace loop clamp (5) and secure with capscrew (4).
f.
Replace fuel system accessory (lift pump) (para. 2-31).
3-59
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals