Replace/Repair Door Assembly (Right Hand). (FIGURE 2-8)

TM 55-1905-223-24-4

2-15. Replace/Repair Door Assembly (Right Hand). (FIGURE 2-8)

This task covers:

a. Removal,

b. Repair,

Replacement.

INITIAL SETUP

Tools

Equipment Condition

Tool kit, general mechanic's rail

Equipment secured and tagged "Out of

and marine diesel engines,

Service" (TM 55-1905-223-10)

Starter disconnected (para. 2-20).

Materials/Parts

Red lens P/N 308-0561

Yellow lens P/N 308-0563

Door assembly, RH P/N 319-0049

Warning tags, Item 21, Appendix C

Zenor diode P/N 359-0082

Lamp Module P/N 308-0546

REMOVAL

Remove retaining nuts (6).

Remove yellow lens (4), red lens (5), and lamp module (3) from push switch (2).

Use a flat head screwdriver to open the door. Insert into screws (1) and turn counterclockwise to release

latches inside instrument panel. Swing both doors open.

Disconnect electrical lead (8) and ground wire (10) from terminal board (7).

Remove machine screw (13) and hexagon nut (14). Remove electrical lead (15) connecting zenor diode (12)

to resistor (9).

Unscrew retaining nut (11) and remove zenor diode (12).

Remove three machine screws (18) and lockwashers (17).

Remove right hand door assembly (16).

2-41