|
|
TM 55-1905-223-24-4
2-20. Replace/Repair Starting Motor Group. (FIGURE 2-13)
This task covers:
a. Removal,
b. Repair,
c. Replacement.
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's
Engine secured (TM 55-1905-223-10).
rail and marine diesel engines,
Power supply disconnected and
tagged "Out of Service".
Torque wrench kit P/N 3377216
Battery banks disconnected.
Materials/Parts
Starting motor P/N 3904057
Warning tags, Item 21, Appendix C
REMOVAL
a.
Disconnect ground cable from the battery terminal.
b.
Tag each electrical wire to indicate locations.
c.
Use 15 mm closed wrench, remove two bolts (1) from mounting.
d.
Remove starting motor (2) from block.
REPAIR
Repair at this level of maintenance is by replacement of: Starting motor (2).
REPLACMENT
a.
Install starting motor.
b.
Secure by installing bolts (1). Torque to 32 ft-lbs (43 N-m).
c.
Connect ground cables to battery terminal in the proper location as identified by tag.
2-53
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |