Figure 3-23. Work Light Repair (Sheet 2 of 2).

TM 55-1730-228-13&P

3-24. LIGHTS - REPAIR(Continued)

3-24

Figure 3-23. Work Light Repair (Sheet 2 of 2).

(2) Separate the front housing (4) and back housing (2) of the light assembly.

(3) Remove two leads from back of bulb (3).

(4) Remove tension spring (5) securing bulb (3).

(5) Remove bulb (3).

b. ASSEMBLY:

(1) Clean contacts thoroughly.

(2) Position bulb (3) in place.

(3) Install spring (5) to secure bulb (3) in front housing (4).

(4) Connect leads and position bulb (3).

(5) Position the front housing (4) and back housing (2) of light assembly together and align screw holes.

(6) Install two screws (1) and tighten.

(7) Perform operational check. Refer to para 2-14.

END OF TASK

3-60