WIRING - REPLACE

TM55-1730-228-13&P

3-18. WIRING - REPLACE

3-18

This task covers:

a. Removal

b. Installation

INITIAL SETUP

Materials/Parts

Equipment

As Required

Condition

Para

Condition Description

Tools Required

3-17

Battery ground cable

disconnected.

Personnel Required

MOS63B, 1 Mechanic

NOTE

See Foldouts, located in back of this manual, Figures OF-1, OF-2, OF-3 and OF-4 for

wiring schematics.

a. REMOVAL: Disconnect faulty wire(s) from terminal(s) as required.

b. INSTALLATION:

(1) Install wire(s) on proper terminal(s). Be sure good contact is made.

(2) Connect ground cable to battery. Refer to para 3-17.

(3) Install tiestraps as needed to keep wire(s) from rub points.

(4) Perform operational check for proper function.

END OF TASK

3-48