Table 3-1. Lubrication and Service

TM55-1730-228-13&P

c. Lubrication/Service Points. Use Figure 3-1, SPEMS Lubrication Points, to identify the general area.

Item numbers on Figure 3-1 correspond to the item numbers in Table 3-1, Lubrication and Service.

CAUTION

Clean fittings before lubricating with a clean cloth. Clean parts with dry cleaning solvent (SD),

type II or equivalent. Dry before lubricating. Dotted leader lines on Figure 3-1 indicate that

lubrication is required on both sides of the SPEMS.

Table 3-1. Lubrication and Service

GO ON TO NEXT PAGE

Figure 3-2. Hydraulic Filler Breather Cap.

3-5