 |
|||
|
|
|||
|
Page Title:
Figure 2-2. Operator's Controls Located On Base (Base Control Box). |
|
||
| ||||||||||
|
|
 TM 55-1730-228-13&P
(b) The platform control contains a toggle type horn switch whereas the base control has no horn switch.
(c) The base control is equipped with a switch to override the platform control in the event of an emergency
such as personnel rendered unconscious due to an accident while working on the platform.
Figure 2-2. Operator's Controls Located On Base (Base Control Box).
b. Controls. The operator's controls (Figures 2-1 and 2-2) are listed below.
(1) MODE SELECTOR SWITCHES-These switches are used to select the operating mode (controlled by the
control lever) for the SPEMS. Operate the mode selector switch with your left hand thumb. See Figure 2-3.
DRIVE MODE-Select this switch for forward or reverse travel of the SPEMS.
STABILIZER MODE- Select this switch to extend and retract the stabilizers.
LIFT MODE-Select this switch to raise and lower the platform.
DECK MODE-Select this switch to move the platform 1 ft (30.5 cm) forward or back to the original
position.
Figure 2-3. Operating Mode Switches.
2-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals