Checking and adjusting tie rods (cont).

TM 55-1730-227-13&P

3-11.

C h e c k i n g (cont).

(4) Measure between tread centers at hub height in front of tires (measure-

ment B).

(5) Measurement B must be 1/16 inch less than measurement A.

b . A d j u s t i n g . If measurement B is too short, lengthen tie rods. If measurement

B is too long, shorten tie rods.

(1) Loosen two locknuts (1 and 3)

on both tie rods.

( 2 ) Turn tubes (2) to shorten or

lengthen tie rods as needed.

(3) Check adjustments using the

(4) When measurements are correct,

tighten locknuts (1 and 3).

3-6