Assembly. - TM-55-1670-259-200011

TM 55-1670-259-20

(18) Insert 4 inches of the loose nylon webbing in-

(15) Place a connector link at the top and to the

dicated in (16) above clockwise into the two right

right of the four nylon sling loops (fig. 2-4).

nylon sling loops, and manually adjust the web ring to

(16) Determine which end of the unrolled web ring

tighten the web ring diameter.

has the nylon buffer sewn on it. Place the end loop

with the sewn nylon buffer on one leg of the connec-

tor link and insure that the sewn buffer faces inward.

(19) With the end of the web ring indicated in (17)

Insert the 7-inch-loose end of the sewn buffer through

a b o v e , continue passing the loose end through the

one loop of the retainer strap as indicated in figure

nylon sling loops until four cycles have been com-

2-4.

pleted and three rums of the web ring are situated

between the legs of the connector link. Position the

(17) Working in a counterclockwise direction, thread

second web ring loop onto the outside of the connector

the opposite end of the web ring through one loop of

link.

the retainer strap, through the cotton buffer loops at

the top of the four nylon legs, through the second loop

(20) Place end on connector link and secure end

of the retainer strap and between the legs of the con-

with two screws, using a flat-tip screwdriver (fig. 2-6).

nector link (fig. 2-5).

Change 1

2-6