Section I. INTRODUCTION - TM-9-4931-496-34P0002

TM 9-4931-496-34P

Section I. INTRODUCTION

1. Scope

to a figure number and item number in column 1.

This manual lists repair parts that are required for

NOTE

maintenance of Selected Items of Secondary Transfer

The figure and item number columns

Standards Calibration Set AN/GSM-259 (NSN 4931-01-

represent cross-reference numbers,

019-1829) and is applicable to Army area calibration

since illustrations are not included in

teams (AACT's).

this manual.

NOTE

3. Explanation of Columns

Throughout this manual, DS is used

Refer to section I of TM 9-4931-700-34P for explanation

to indicate AACT.

of columns (para 3), special information (para 4, except

2. General

for subparagraph 40 which is not applicable to this

This manual is divided as follows:

manual), and abbreviations (para 6).

a. Section I. Introduction.

4. How to Locate Repair Parts

b. Section II.

Repair Parts List.

A list, in

When NSN or part number is unknown, use the repair

alphabetical sequence, of repair parts authorized for the

parts listing and locate the item by description. When

performance of maintenance at the AACT support level.

National stock number or part number is known, use the

c. Section III. National Stock Number and Part

list of NSN's or the part numbers and locate the cross-

Number Index. A list in ascending numerical sequence,

referenced figure and item number. Locate the cross-

of all National stock numbers (NSN's) appearing in the

referenced figure and item number under column 1 of

repair parts list, followed by a list of all part numbers in

the repair parts list for the complete description of the

alpha-numeric sequence appearing in the list. The

repair part.

NSN's and part numbers are cross-referenced

Not fielded as of the date of this manual.

1-1