OPERATIONAL TESTING OF THE STARTER

TM 9- 2920- 232- 34&P / TO 38X14- 2- 32

- -

OPERATIONAL TESTING OF THE STARTER

0011 00

THIS WORK PACKAGE COVERS:

Testing

INITIAL SETUP:

Equipment

Equipment Conditions

Test Stand, 500A

Starter completely assembled (need not be fully

sealed) and mounted on test setup

Test bench setup consisting of:

Suitable mount of holder for starter

Carbon pile and fully charged 24V battery or equivalent

power supply

Voltmeter, 0--50 vdc

RPM indicator, 10,000 rpm suitable interconnect

Testing

1. NO--LOAD Performance Test.

a. Connect starter to power source as shown.

b. Adjust carbon pile (or power supply) to provide 20 volts, as read on voltmeter, while starter is operating.

Current measurement shown on ammeter shall be 95 to 120 amperes, and speed of rotation shall be 5500 to

7500 rpm.

END OF WORK PACKAGE

0011 00-112 0-ank

00-1/ 0bl-1