GENERAL MAINTENANCE INSTRUCTIONS - TM-9-2920-232-34-P0033

TM 9- 2920- 232- 34&P / TO 38X14- 2- 32

- -

GENERAL MAINTENANCE INSTRUCTIONS

0006 00

THIS WORK PACKAGE COVERS:

General Maintenance Instructions

PURPOSE

This chapter contains information for general cleaning; disassembly; cleaning, inspection, and repair of compo-

nent parts; assembly; operational testing; and storage of starter assemblies after they have been removed from

the engine.

APPLICATION

All procedures in this chapter apply to both starter configurations covered by this manual except where identified as

for 6--brush or 12--brush starter.

ORGANIZATION

Each maintenance work package described in this chapter will be organized in the following manner:

a. This Work Package Covers. Provides a description of the scope of the work package.

b. Initial Setup. lists the information you will need before starting the procedure, such as:

1) Tool requirements.

2) Material and supplies requirements.

3) Personnel requirements.

4) Equipment condition.

Procedure. Outlines the process for performing the task in step--by--step sequence.

ILLUSTRATIONS

Each illustration, used to describe a procedural step, will be located following that step(s).

CONVERSIONS

Conversion to a 6--brush starter is mandatory when a 12--brush starter is disassembled for maintenance. Use Kit

No. 12314630 for converting starter part number 1109972, and use Kit No. 12314632 for converting starter part

number 1990272. Kits will contain conversion instructions.

REMOVAL AND INSTALLATION

Refer to TM 9--2815--220--34 for instructions covering the removal and installation of the starter.

END OF WORK PACKAGE

0006 00-062 0-ank

00-1/ 0bl-1