 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
TOP WELDMENT REMOVAL AND INSTALLATION (Sheet 3 of 4)
WARNING
CAUTION
Use care when taking off top weldment (1). Hold top
weldment (1) steady as it is lifted so it does not hit
and damage engine parts.
3. LIFT TOP WELDMENT (1) STRAIGHT UP,
UNTIL FLANGE (2) IS ABOUT 12 INCHES
(30.48 CM) ABOVE AFW MOUNTING
FLANGE (3). PUT TOP WELDMENT (1)
NEARBY ON A CLEAN SURFACE.
4. INSPECT TOP WELDMENT (1) FOR
CRACKS, BREAKS, OR WARPS. REPLACE
AS REQUIRED.
5. UNHOOK AND STOW SLING (4).
INSTALLATION:
1. ATTACH SLING (4) AND POSITION TOP
WELDMENT (1).
a. Lower hoist hook (5) over top weldment
(1). Hook sling (4) to hoist hook (5).
b. Hook sling (4) to four rods (6) of top
weldment (1).
c. Place top weldment (1) over bottom
weldment (7). Lower top weldment (1) and
mate with bottom weldment (7) so that
pin (8) goes through hole (9).
Go on to Sheet 4
4-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals