ENGINE/REAR MODULE LIFTING SLING INSTALLATION AND REMOVAL (Sheet 1 of 2)

TM 9-2835-255-34

TOP WELDMENT REMOVAL AND INSTALLATION (Sheet 4 of 4)

2. SECURE TOP WELDMENT (1).

NOTE

If container has T-bolts (2), go to step C.

a. Put bar in hole (3) and move bottom

weldment (4) until holes (5) aline.

b, Install 28 bolts (6) and nuts (7).

c. Put bar in hole (3) and move bottom

weldment (4) until slots (8) aline.

d. Push 28 T-bolts (2) up through slot (8) and

turn them l/4-turn. Tighten 28 nuts (9).

3. UNHOOK AND STOW SLING (10).

End of Task

ENGINE/REAR MODULE LIFTING SLING INSTALLATION AND REMOVAL

(Sheet 1 of 2)

TOOLS: General mechanic's tool kit: automotive (SC 5180-90-N26)

Engine/Rear module lifting sling (Item 32, Appendix D)

Hoist, 2-ton minimum capacity (item 36, Appendix D)

PERSONNEL: Two

INSTALLATION:

NOTE

If step plate (1) is on engine (2), do step 1.

1. REMOVE PLATE (1).

a. Remove two bolts (3) and lock-

washers (4).

b. Remove plate (1).

Go on to Sheet 2

4-4 Change2