 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2815-224-34&P
Turbocharger Maintenance Instructions (Cont)
14-7. TURBOCHARGER REPAIR (CONT).
(24) Place backplate (16) in vise with soft jaws.
(25) Check thrust float with dial indicator. Move
shaft (21) back and forth in center
housing (5). Indicator reading (thrust float)
must be 0.003 to 0.010-in. (0.08 to 0.25 mm).
(26) Aline matchmarks on center housing (5) with those on turbine housing (25).
(27) Install turbine wheel assembly (26) in turbine housing (25) and coupling (27).
(28) Apply antiseize compound to threads of screw (28).
CAUTION
Do not tighten turbine housing clamp until alined with turbine housing. If parts
are not alined, turbocharger will be damaged.
(29) Tighten locknut (29) to 160 lb-in. (18 Nm).
(30) Loosen locknut (29).
(31) Tighten locknut (29) to 165 lb-in. (18.9 Nm).
14-54
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals