Removal-continued - TM-9-2815-224-34-P0371

TM 9-2815-224-34&P

Blower Maintenance Instructions (Cont)

NOTE

There are two models of air inlet adapter. Model B has a removable air inlet. If

removing Model B, perform steps (1.1 through 3). If removing Model A, perform

steps (2 and 3).

Remove screw (3.1), lockwasher (3.2), and washer (3.3) from hose clamp (3.4).

(1.1)

Remove hose (3.5) from elbow (3.6).

(1.2)

Remove three screws (3.7), air inlet (3.81, and gasket (3.9) from air inlet adapter (3).

(1.3)

Remove plug (3.10) and elbow (3.6) from air inlet adapter (3).

(1.4)

Remove 10 screws (4) and lockwashers (5) from air inlet adapter (3).

(2)

CAUTION

Keep dirt and debris out of blower. Foreign material will damage blower.

Remove air inlet adapter (3), gasket (6), and two preformed packings (7) from top of blower (6).

(3)

14-36.1/(14-36.2 blank)

Change 2