FIGURE 279. REMOVING OR INSTALLING SCAVE-NGER PUMP INLET TUBE.

(2) Figure 279. (A) Remove two 1/4 x 7/8

cap screws and 1/4-inch lock washers

securing scavenger pump inlet tube to

pressure oil pump. (B) Remove two

5/16 x 5/8 cap screws and 5/16-inch

lock washers securing scavenger pump

inlet tube to crankcase. (C) Remove

scavenger pump inlet tube. (D) Remove

and discard scavenger pump inlet tube

gasket.

(3) Figure 280. (A) Remove two 1/4 x 7/8

cap screws and 1/4-inch lock washers

securing oil pump outlet tube to pres-

sure oil pump. (B) Remove two 5/16 x

7/8 cap screws and 5/16-inch lock

washers securing oil pump outlet tube

to crankcase. (C) Remove oil pump out-

let tube and adapter. (D) Remove and

discard outlet tube and gasket. (E) Re-

move and discard 3/4 id x 3/32 thk

preformed packing from tube.

FIGURE 280. REMOVING OR INSTALLING

OIL PUMP OUTLET TUBE.

172