Figure 5-36. Removing or installing secondary fuel filter.

Disconnect

1. Disconnect fuel outlet hose (A) from bulkhead elbow.

2. Remove nut (B) attaching fuel outlet hose clamp to

lifting eye stud.

Note. Re-install nut on lifting eye stud and

Remove

tighten. Lifting eye will be used for oil filter and

1. Disconnect fuel outlet hose (A) from elbow in

damper housing assembly removal.

secondary fuel filter and bulkhead elbow in left front

shroud and remote hose.

Connect

2. Disconnect and remove fuel inlet hose (B).

1. Remove nut (B) from lifting eye stud. Install fuel

3. Remove elbows and pipe reducers (C).

outlet hose clamp on stud and re-install nut (B).

4. Disconnect and remove secondary fuel filter fuel drain

2. Connect fuel outlet hose (A) to bulkhead elbow.

tube (D).

5. Remove four cap screws (E) and lock washers at-

Figure 5-37. Disconnecting or connecting

taching secondary fuel filter to mounting bracket.

fuel/ water separator fuel outlet hose

Remove filter.

from bulkhead elbow.

Install

1. Position secondary fuel filter against mounting

bracket and install four cap screws (E) and lock

washers securing filter to bracket.

2. Position secondary fuel filter fuel drain tube (D)

under filter and con nect tube to filter.

3. Install elbows and pipe reducers (C) in filter.

4. Connect fuel inlet hose (B) to filter.

5. Connect fuel outlet hose (A) to bulkhead elbow in left

front shroud and elbow in filter.

Figure 5-36. Removing or installing

secondary fuel filter.

5-20